Filter Bags

Bags are made from polypropylene or polyester. Normally woven material is used for making bags. For finer filtration non-woven media is preferable. We give heat-sealed bags with polypropylene color. Color is used to hold the bag in the housing as shown here in the picture. The bag is rested on perforated cylinder.

The filtration is in to out in bag filter. Fluid enters from the top of the housing in to the bag. Contamination retains on the bag and clear fluid passes from bag through perforated cylinder. Once bag is full of contamination, one needs to clean it by taking it out from the housing or replace it with new one.

  • Micron Rating                                              : 1, 5, 10, 20, 50, 100, 200 μ

  • Dia & Length                                                : 4”x20”, 7”x32”

  • Operating Temperature                             : 100° C

  • Configuration                                              : PP Collar Bag, Steel Ring Bag, Snap Band type

  • Filter media                                                 : Polypropylene, Polyester, Nylon, HDPE


  • High performance

  • Good for viscous fluid filtration

  • Higher flow rates with lesser pressure drop

  • Broad chemical compatibility

  • High dirt holding capacity

  • Simple maintenance

  • FDA approved  

  • Primary pharmaceuticals

  • Oils

  • Adhesives

  • Resins

  • Paints

  • High Viscosity Fluids

  • Cutting fluids/oils