Polypropylene pleated filter cartridges have been designed as an effective membrane pre-filters and as final polishing filters for many liquid processing applications. The cartridges are double layered filters. The graded porosity design removes particles in sequence such as larger particles by the more open outer layers and the smaller particles by the tighter inner layers. The outer layer acts as the pre-filter while the inner layers provide the rating at the specified pore size. This efficiently spreads the contaminants throughout the media matrix resulting in superior contaminant holding capacity, lifetime & pressure drop as compared to other media cartridges.
Micron Rating : 0.2, 0.5, 1, 3, 5, 10, 25, 50, 70 μ
Length : 10”, 20”, 30”, 40”
Inner Diameter Standard : 28 mm
Outer Diameter Standard : 64 mm
Operating Temperature : 80° C
Configuration : Double Open End (DOE), Code 7(226 O’ Ring Flat and Bayonet Design), Code 3(222 O’ Ring Flat and Bayonet Design)
Filter media : 100% Polypropylene fiber
Support media : Polypropylene fiber
‘O’ Rings/Gaskets : Silicone/ EPDM/ Viton
Very good for pre filtration & Clarification of fluids
Graded porosity polypropylene Media.
100% PP construction, wide chemical compatibility.
Consistent & good flow rates.
Biologically safe
No fiber migration
FDA approved
Thermally welded construction
End connections to fit all standard housings
Pharmaceuticals
Food and Beverage
Chemical Industry
Water Treatment Industry
Metal Finishing
Electronics
Cosmetics