Stainless Steel sintered powder filter cartridges are recommended for the filtration of air or liquid at higher operating temperatures & corrosive environment. Sintered S.S. cartridges are produced by cold isostatic pressing, which gives high porosity to the material and also stability. They can easily be cleaned or back washed thus having longer shelf life. Sintered filters are able to withstand high differential pressure across the filters.
Micron Rating : 0.2, 0.5, 1, 3, 5, 10, 25, 50, 75, 100 μ
Length : 10”, 20”, 30”, 40”, and customizable lengths
Inner Diameter Standard : 28 mm
Outer Diameter Standard : 64 mm
Operating Temperature : -200°C to1000°C
Configuration : Double Open End (DOE), Code 7(226 O’ Ring Flat and Bayonet Design), 1” BSP Threaded
High mechanical strength & good integrity
Good corrosion and thermal resistance
No possibility of media migration
Good permeability
Service life can be prolonged by cleaning and regenerating process
Gas & liquid filtration
Solid catalyst recovery
Filtration of slurry oil
Filtration of petrochemical products
High temperature gas filtration
Vent applications
Chemical reagents
Fluidization